pleeeeeaase helllppppp
Reply
|
Lizzie_Ann
Bracelet King
 |
4 years, 5 months ago by Lizzie_Ann
So I was working on one of my alphas and I’m about 13 rows in and my base string cane out of my alpha. It didn’t break, the tape just didn’t work and it came out. Is there ANY way to fix this other than just restarting? PLEASE LET ME KNOW!
|
|
Addibug
Bracelet King
 |
4 years, 5 months ago by Addibug
I don't think so, you could try some different methods but it would be extremely difficult.
|
|
Sheva
Professional
 |
4 years, 5 months ago by Sheva
I'd try threading the base string on a needle and putting it back through the knots that were originally made on it
|
|
el526320
Bracelet King
 |
4 years, 5 months ago by el526320
I have had that happen to me in the past. I decided to just restart but I'm sure you could try gluing it to the back. It might look weird but that way you could keep going. You can also try threading it like suggested earlier. Good luck!
|
|
Lizzie_Ann
Bracelet King
|
4 years, 5 months ago by Lizzie_Ann
@el526320 @Sheva @Addibug ok Thanks for the help!✨
|
|
2006_Mandy
Bracelet King
 |
4 years, 5 months ago by 2006_Mandy
This might seem stupid or might not work but my suggestion is to cover one side completely in modpodge and let it dry then on the other side (the back side) glue on the string that fell out and continue knotting then reapply glue on the other half of the bracelet and then ontop of both layers after. The glue when dry should hold it in place.
|
Reply
